Trimfix Automotive Adhesive

$9.00

  • High Heat Resistance 500ml Spray Adhesive
  • 5mm thick – lightweight
  • Easy fit under plyboard
  • Absorbs minor floor imperfections
Category:

Description

Trimfix Automotive Adhesive is used by the professionals for Motorhome, Campervan & Classic vehicle trimming applications, interiors, headlining’s, carpeting, door linings, fabric, vinyl & leather, plus many more applications including the marine industry. This commercial quality product Features high-temperature resistance up to 120 degrees (248F) and is extremely flexible. 10 – 12 cans would normally be sufficient to fully carpet line a T5 or equivalent size campervan. Trim-Fix High Temperature 120°C is an exceptionally powerful heat resistant spray adhesive specially formulated not to soften and release when exposed to high temperatures. Trim-Fix High Temperatures 120°C spray adhesive properties are particularly suited for the bonding of Headlinings, Foam, Leather, Lining carpet, Flooring carpet, Felts, Fabrics, Rubber, Laminates and Polythene to themselves or materials such as Wood, Concrete, Metal, Plastic & Rubber. How to Use Trim-Fix is extremely easy to apply – firstly, ensure that surfaces to be bonded are clean, dry and free from any contaminants. Spray the adhesive in a uniform coating from approximately 25cm (10 inches). For applications on porous materials, or for maximum strength adhesion, coat both surfaces. Allow 1-2 minutes for the solvents to evaporate. Press together firmly, working from the center outwards to achieve a good bond. For best results, the adhesive should be used at temperatures between 15°C-25°C and stored at temperatures between 10°C-20°C. Any excess adhesive may be removed with our Solvent Cleaner. Note: Trim-Fix is not suitable to use on Heavily plasticized PVC vinyl and Polystyrene insulation.
 

Reviews

There are no reviews yet.

Be the first to review “Trimfix Automotive Adhesive”

Your email address will not be published.